Chevrolet Blazer kit allows you to quickly and easily repair your shift cable by replacing the bushing. The patent pending coupling and custom molded replacement bushing ensures a quality repair with ease. A professional can perform this repair in under 5 minutes, average time for a non-professional is less than 10 minutes. This bushing is made from a material that was designed to outlast the factory bushing and includes everything needed to install.
The kit includes DIY instructions, custom molded bushing, and patent pending installation tools.
Please click here to view installation page.
This kit fits the following vehicles:
1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
(Automatic transmission only. Including 2wd and 4wd models)
Fits Cable Ends Similar to:
Order Online at www.BushingFix.com This shift cable bushing repair kit allows you to fix your Blazer shift cable bushing very easily. It takes about 2 minutes and comes with a warranty, it's made from better material than the factory bushing so it'll last longer. http://www.bushingfix.com
Lifetime replacement warranty against defects in material or production. This warranty does not cover improper installation. For replacement, we may require pictures of failed parts and/or descriptions of failure, and return of the failed parts.
Posted by Jeff D. on 17th Aug 2017
Received the bushing for a 2000 Chevy Blazer. In the video it indicated that I would be able to pull out the old bushing but there wasn't a bushing in it, it was just part of the connection. So using a different sized drill bits, I drilled out the connection until I was able to put the new bushing in as required. Ended up a 1/4" drill did the trick. Inserted the bushing, put a bit of grease inside where the post would go, slipped it on, then used a pair of channel lock pliers to push the post in to seat it properly in the bushing. Has been working since.
Posted by Unknown on 26th Jun 2017
It took awhile for me to get the old bushing out, after that it was a breeze to install. The old bushing lasted 16 years (252 K miles) if the replacement lasts that long I will be satisfied. I would recommend lubricating the replacement before snapping it on.
Posted by Robert from Hagerstown Md on 28th Jul 2016
The bushing installed and fixed the shift cable just a the website said and if it only lasts as long as the original this is a good thing. My only issue is the lack of installation instruction. My kit came with 2 bushings and a piece of fortune cookie paper describing which to use. Once I worked through that confusion everything was good. As I say, if this lasts only as long as the original it is well worth it.
Posted by Ed Dyde on 24th Apr 2016
product is made from rubber and does not last ,falls off after 3 or 4 months. should be made from plastic and would be a great product
Below are the available bulk discount rates for each individual item when you purchase a certain amount