Chevrolet Corvette kit allows you to quickly and easily repair your shift cable by replacing the bushing. The patent pending coupling and custom molded replacement bushing ensure a quality repair with ease. A professional can perform this repair in under 10 minutes, average time for a non-professional is less than 25 minutes. This bushing is made from a material that was designed to outlast the factory bushing and includes everything needed to install.
Lifetime replacement warranty against defects in material or production. This warranty does not cover improper installation. For replacement, we may require pictures of failed parts and/or descriptions of failure, and return of the failed parts.
Showing reviews 1-10 of 13 | Next
Posted by Luis on 5th Dec 2017
Fits perfect for my c6 ls2 automatic transmission, less than a week from usa to spain, good quality!! Recomended
Posted by Joe on 1st Nov 2017
I used the UP1KIT to repair a broken shifter bushing on my 2005 Corvette. The new bushing is an exact match to the original bushing. Once I removed the broken bushing from the end of the cable, I was able to install the new bushing within a few minutes. It took some effort to reconnect the shifter to the repaired cable due to lack of room within the tunnel area. I aligned the two and dropped the shifter onto the cable end and pushed down on the shifter to snap the two together. The shifter works as good as new. I would highly recommend this product.
Posted by Timothy P. Homesley on 21st Oct 2017
Fit perfectly, it use sent and recieved in a timely manner
Posted by KO on 6th Oct 2017
Because of this busing, I didn't need to purchase an entire shift cable and didn't need to pay anyone an hourly fee to install a new shift cable. Although it is very frustrating that such a small plastic bushing made my car "dead in the water", I was very happy to buy this little bushing and install it myself and save hundreds of dollars.
Posted by Ken Walker on 25th Sep 2017
The installation took all of about 60 sec to pop together once you got to it and removed what remained of the old bushing, getting to it is another story. My problem was the shifter side of a 2007 Corvette and I had this same exact issue on a 1999 Corvette and replaced the entire cable, take my word for it ............... you really don't want to do that. This is the way to go if the issue is just the bushing.
Posted by Bill on 22nd Aug 2017
The bushing at the shifter end on my '08 Corvette failed. The replacement bushing was easy to install and the shifter works as good as new. I paid for express shipping and received the bushing kit the very next day.
Posted by Scott Pirie on 3rd Aug 2017
Shifter cable broke on me, dealer wanted over $200 for the cable a nd 3 hours labor to replace, totaling over $600 dollars. Thankfully i found this replacement fix. It was a simple bushing in the upper cable that failed. I pulled apart the shifter console with limited issues, removed old bushing and replaced using this new kit, which included bushing and easy to use kit. Was skeptical at first, but it was cheap and relatively easy to replace, really impressed.
Posted by cb on 28th Jun 2017
easy fix works perfectly postage was a bit steep but cheaper than buying a new cable.
Posted by Norman Fry on 6th Jun 2017
The bushing fit perfect and snapted right in place. I would definetly recomend this product.
Posted by Unknown on 22nd May 2017
Install waa very easy took less than 10 seconds to replace the bushing on my cable. The dealership quoted me $478 to replace my shift cable. this saved me big time.works perfectly.
Showing reviews 1-10 of 13 | Next
Below are the available bulk discount rates for each individual item when you purchase a certain amount